// CODE SNIPPET
8.7.2.16.1 Change in Type of Service
Go To Full Code Chapter
Where an alteration consists of a change in type of service from freight to passenger or passenger to freight, the installation shall conform to
(b) Sections 2.12 and 2.13
(d) Sections 2.14 and 2.15, except the car platform guard (apron) shall conform to 2.15.9 only to the extent the existing pit shall permit, but in no case less than the leveling or truck zone, plus 75 mm (3 in.)
(e) Section 2.17, except that where gradual wedge clamp and drum-operated flexible guide-clamp safeties are reused, the stopping distances shall conform to the requirements of the Code at the time of installation [see ASME A17.2, Table 2.29.2(c)]
(f) Section 2.18, except that the pitch diameters of speed governor sheaves and governor tension sheaves are not required to conform to 2.18.7
(g) Sections 2.16; 2.20, except as specified in 8.7.2.21.4; and Sections 2.24 through 2.27 [as modified by 8.7.2.28(a) through 8.7.2.28(f)], except 2.24.1
(h) Section 2.19
For inspection and test requirements, see 8.10.2.3.2(q).
Related Code Sections
8.7.2.16.1 General Requirements, Change in Type of Service
Where an alteration consists of a change in type of service from freight to passenger or passenger to freight, the installation shall conform ...
8.7.3.31.8 General Requirements, Emergency Operation and Signaling Devices
Equipment and floors shall be identified as required by Section 2.29 for elevators in the same group. (f) Changes in type of service (8.7.3.17 ...
8.10.3.3 General Requirements, Inspection and Test Requirements for Altered Installations
), changes travel (8.7.3.22.1), changes the type of service (8.7.3.17), changes the class of loading (8.7.3.18), or changes from freight to passenger ...
8.10.3.3.2 General Requirements,
increases the rated speed (8.7.3.22.2), changes travel (8.7.3.22.1), changes the type of service (8.7.3.17), changes the class of loading (8.7.3.18 ...