// CODE SNIPPET
R606.4.3 Change in Thickness
JUMP TO FULL CODE CHAPTER
Where walls of masonry of hollow units or masonry-bonded hollow walls are decreased in thickness, a course of solid masonry or masonry units filled with mortar or grout shall be constructed between the wall below and the thinner wall above, or special units or construction shall be used to transmit the loads from face shells or wythes above to those below.
Related Code Sections
R606.4.3 Wall Construction, Change in Thickness
Where walls of masonry of hollow units or masonry-bonded hollow walls are decreased in thickness, a course of solid masonry or masonry units filled ...
2018 Philadelphia Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.4 Thickness of Masonry > R606.4.3 Change in Thickness
1503.2.1 Roof Assemblies and Rooftop Structures, Locations
Flashing shall be installed at wall and roof intersections, at gutters, wherever there is a change in roof slope or direction and around roof ...
2018 Philadelphia Building Code > 15 Roof Assemblies and Rooftop Structures > 1503 Weather Protection > 1503.2 Flashing > 1503.2.1 Locations
1011.5.3 Change of Occupancy, Fire Barriers
Where a change of occupancy classification is made to a higher-hazard category as shown in Table 1011.5, fire barriers in separated mixed use ...
2018 Philadelphia Existing Building Code > 10 Change of Occupancy > 1011 Change of Occupancy Classification > 1011.5 Heights and Areas > 1011.5.3 Fire Barriers
R903.2.1 Roof Assemblies, Locations
Flashings shall be installed at wall and roof intersections, wherever there is a change in roof slope or direction and around roof openings. A ...
2018 Philadelphia Residential Code > 9 Roof Assemblies > R903 Weather Protection > R903.2 Flashing > R903.2.1 Locations
220.127.116.11 Scope and Administration, Changes
The owner or the owner's authorized agent shall be responsible to ensure that any change to the facility, process or system does not increase ...
2018 Philadelphia Performance Code > 1 Scope and Administration > 102 Administrative Provisions > 102.3 Performance Requirements > 102.3.1 Building Owner's, or the Owner's Authorized Agent's, Responsibility > 18.104.22.168 Changes