// CODE SNIPPET
R802.7.1.2 Ceiling Joist Taper Cut
JUMP TO FULL CODE CHAPTER
Taper cuts at the ends of the ceiling joist shall not exceed one-fourth the depth of the member in accordance with Figure R802.7.1.2.
CEILING JOIST TAPER CUT
Related Code Sections
R802.7.1.2 Roof-Ceiling Construction, Ceiling Joist Taper Cut
Taper cuts at the ends of the ceiling joist shall not exceed one-fourth the depth of the member in accordance with Figure R802.7.1.2. FIGURE ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.7 Cutting, Drilling and Notching > R802.7.1 Sawn Lumber > R802.7.1.2 Ceiling Joist Taper Cut
R804.3.1 Roof-Ceiling Construction, Ceiling Joists
Cold-formed steel ceiling joists shall be in accordance with this section ...
Residential Code 2018 of Kansas > 8 Roof-Ceiling Construction > R804 Cold-Formed Steel Roof Framing > R804.3 Roof Construction > R804.3.1 Ceiling Joists
342.28 Wiring Methods and Materials, Reaming and Threading
All cut ends shall be reamed or otherwise finished to remove rough edges. Where conduit is threaded in the field, a standard cutting die with a taper ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 342 Intermediate Metal Conduit: Type IMC > 342.28 Reaming and Threading
344.28 Wiring Methods and Materials, Reaming and Threading
All cut ends shall be reamed or otherwise finished to remove rough edges. Where conduit is threaded in the field, a standard cutting die with a 1 ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 344 Rigid Metal Conduit: Type RMC > 344.28 Reaming and Threading
2.20.9.4 Electric Elevators, Tapered Rope Sockets
The use of tapered rope sockets shall be permitted only for steel wire ropes 8 mm ( 5 / 16 in.) or greater. When used, the tapered rope sockets ...
Safety Code for Elevators and Escalators 2016 of Kansas > 2 Electric Elevators > 2.20 Suspension Means and Their Connections > 2.20.9 Suspension Member Fastening > 2.20.9.4 Tapered Rope Sockets