// CODE SNIPPET
418.3.2 Capture Box
JUMP TO FULL CODE CHAPTER
When the drain is not located in
the ETO sterilizer equipment room, ventilation is required
by a capture box.
Related Code Sections
418.3.2 Ventilation Air, Capture Box
When the drain is not located in
the ETO sterilizer equipment room, ventilation is required
by a capture box ...
California Mechanical Code 2019 > 4 Ventilation Air > 418.0 Design Requirements for Ethylene Oxide (Eto) Sterilization Areas > 418.3 Ventilation Requirements > 418.3.2 Capture Box
418.3.2 Ventilation Air, Capture Box
When the drain is not located in
the ETO sterilizer equipment room, ventilation is
required by a capture box ...
California Mechanical Code 2016 > 4 Ventilation Air > 418.0 Design Requirements for Ethylene Oxide (Eto) Sterilization Areas > 418.3 Ventilation Requirements > 418.3.2 Capture Box
511.2.2.2 Exhaust Systems, Capture and Containment Test
The
permit holder shall verify the capture and containment
performance of Type I hoods. A field test shall be conducted
with all appliances under ...
California Mechanical Code 2019 > 5 Exhaust Systems > 511.0 Air Movement > 511.2 Airflow > 511.2.2 Exhaust-Air Volumes > 511.2.2.2 Capture and Containment Test
511.2.2.2 Exhaust Systems, Capture and Containment Test
The
permit holder shall verify capture and containment
performance of the hoods. A field test shall be
conducted with the appliance under the hood ...
California Mechanical Code 2016 > 5 Exhaust Systems > 511.0 Air Movement > 511.2 Airflow > 511.2.2 Exhaust-Air Volumes > 511.2.2.2 Capture and Containment Test
545.9 Special Occupancies, Boxes
Boxes of dimensions other than those required in Table 314.16(A) shall be permitted to be installed where tested, identified, and listed ...