// CODE SNIPPET
(C) Capacity of Branch Circuit, Feeder, or Service
Related Code Sections
(C) Special Conditions, Capacity of Branch Circuit, Feeder, or Service
An energy management system shall not cause a branch circuit, feeder, or service to be overloaded at any time ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 750 Energy Management Systems > 750.30 Load Management > (C) Capacity of Branch Circuit, Feeder, or Service
225.37 Wiring and Protection, Identification
Where a building or structure has any combination of feeders, branch circuits, or services passing through it or supplying it, a permanent plaque ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.37 Identification
(B) Wiring Methods and Materials, Branch Circuits or Feeders
(b) Exterior Installations. In addition to the provisions of this article, service-entrance cable used for feeders or branch circuits, where ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 338 Service-Entrance Cable: Types SE and USE > 338.10 Uses Permitted > (B) Branch Circuits or Feeders
220.61 Wiring and Protection, Feeder or Service Neutral Load
The feeder or service neutral load shall be the maximum unbalance of the load determined by this article. The maximum unbalanced load shall ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.61 Feeder or Service Neutral Load