// CODE SNIPPET
808.1.1 Capacity Density
Related Code Sections
808.1.1 Interior Finish, Decorative Materials and Furnishings, Capacity Density
The average capacity density of containers located in an individual room or space, other than waste and linen collection rooms, shall not be greater ...
Fire Code 2018 of Kansas > 8 Interior Finish, Decorative Materials and Furnishings > 808 Furnishings Other Than Upholstered Furniture and Mattresses or Decorative Materials in New and Existing Buildings > 808.1 Wastebaskets and Linen Containers in Group I-1, I-2 and I-3 Occupancies and Group B Ambulatory Care Facilities > 808.1.1 Capacity Density
1705.14.5 Special Inspections and Tests, Density
The density of the sprayed fire-resistant material shall be not less than the density specified in the approved fire-resistance design. Density ...
Building Code 2018 of Kansas > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.5 Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
Building Code 2018 of Kansas > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Interior Trim > 2604.2.1 Density
3803.2.2 Higher Education Laboratories, Density
Quantities of Class I flammable liquids in storage and use shall not exceed 8 gallons (30 L) per 100 square feet (9.29 m 2 ) of floor area. Densities ...
Fire Code 2018 of Kansas > 38 Higher Education Laboratories > 3803 General Safety Provisions > 3803.2 Hazardous Materials Storage and Use > 3803.2.2 Density
402.6.4.5.1 Special Detailed Requirements Based on Occupancy and Use, Density
The density of foam plastics used in signs shall be not less than 20 pounds per cubic foot (pcf) (320 kg/ m 3 ) ...
Building Code 2018 of Kansas > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.6 Interior Finishes and Features > 402.6.4 Plastic Signs > 402.6.4.5 Foam Plastics > 402.6.4.5.1 Density