188.8.131.52 Capacity and Data Plates or Signs
Every elevator car shall be provided with a capacity plate or sign and a data plate or sign temporarily fastened in place. The capacity plate or sign shall be located in a conspicuous position inside the car.
The data plate or sign shall be located on the car crosshead or, if there is no crosshead, inside the car.
(b) Temporary data plates or signs shall indicate
(1) the approximate temporary weight of the car including the car safety and all auxiliary equipment attached to the car
(2) the temporary rated load and temporary speed
(3) the wire rope data required by 184.108.40.206
(4) the manufacturer's name and the date of installation
(a) 25 mm (1 in.) for capacity plates
(b) 3 mm (0.125 in.) for data plates