// CODE SNIPPET
2209.2 Cantilevered Steel Storage Racks
JUMP TO FULL CODE CHAPTER
The design, testing, and utilization of cantilevered storage racks made of cold-formed or hot-rolled steel structural members shall be in accordance with RMI ANSI/MH 16.3. Where required by ASCE 7, the seismic design of cantilevered steel storage racks shall be in accordance with Section 15.5.3 of ASCE 7.
Related Code Sections
2209.2 Steel, Cantilevered Steel Storage Racks
The design, testing, and utilization of cantilevered storage racks made of cold-formed or hot-rolled steel structural members shall be in accordance ...
2018 Philadelphia Building Code > 22 Steel > 2209 Steel Storage Racks > 2209.2 Cantilevered Steel Storage Racks
Section 3208 High-Piled Combustible Storage, Rack Storage
Rack storage shall be in accordance with Section 3206 and this section. Bin boxes exceeding 5 feet (1524 mm) in any dimension shall be regulated ...
1705.12.7 Special Inspections and Tests, Storage Racks
Periodic special inspection is required for the anchorage of storage racks that are 8 feet (2438 mm) or greater in height in structures assigned ...
2018 Philadelphia Building Code > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.12 Special Inspections for Seismic Resistance > 1705.12.7 Storage Racks
5704.3.3.6 Flammable and Combustible Liquids, Rack Storage
Where storage on racks is allowed elsewhere in this code, a minimum 4-foot-wide (1219 mm) aisle shall be provided between adjacent rack sections ...
2018 Philadelphia Fire Code > 57 Flammable and Combustible Liquids > 5704 Storage > 5704.3 Container and Portable Tank Storage > 5704.3.3 Indoor Storage > 5704.3.3.6 Rack Storage
R505.3.6 Floors, Floor Cantilevers
Floor cantilevers for the top floor of a two- or three-story building or the first floor of a one-story building shall not exceed 24 inches (610 mm ...
2018 Philadelphia Residential Code > 5 Floors > R505 Cold-Formed Steel Floor Framing > R505.3 Floor Construction > R505.3.6 Floor Cantilevers