// CODE SNIPPET
1910.211(c)(2) Calender
JUMP TO FULL CODE CHAPTER
Calender means a machine equipped with two or more metal rolls revolving in opposite directions and used for continuously sheeting or plying up rubber and plastics compounds and for frictioning or coating materials with rubber and plastics compounds.
Related Code Sections
1910.211(c)(2) Machinery and Machine Guarding, Calender
Calender means a machine equipped with two or more metal rolls revolving in opposite directions and used for continuously sheeting or plying up ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(c) > 1910.211(c)(2) Calender
1910.216(d)(2) Machinery and Machine Guarding, Calenders
Where a calender is so installed that persons cannot normally reach through, over, under, or around to come in contact with the roll bite ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(d) Protection by Location > 1910.216(d)(2) Calenders
1910.262(b)(3) Special Industries, Calender
A calender in essence consists of a set of heavy rollers mounted on vertical side frames and arranged to pass cloth between them. Calenders may ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(3) Calender
1910.212(a)(3)(iv)(i) Machinery and Machine Guarding, Forming Rolls and Calenders
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.212 General Requirements for All Machines > 1910.212(a) Machine Guarding > 1910.212(a)(3) > 1910.212(a)(3)(iv) > 1910.212(a)(3)(iv)(i) Forming Rolls and Calenders
1910.216(c)(1) Machinery and Machine Guarding, Safety Trip, Face
A safety triprod, cable, or wire center cord shall be provided across each pair of in-running rolls extending the length of the face of the rolls. It ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(c) Calender Safety Controls > 1910.216(c)(1) Safety Trip, Face