// CODE SNIPPET
CD302 Calculation of the HVAC TSPR for the Standard Reference Design
Go To Full Code Chapter
The simulation program shall calculate the HVAC TSPR based only on the input for the proposed design and the requirements of this appendix. The calculation procedure shall not allow the user to directly modify the building component characteristics of the standard reference design.
Related Code Sections
CD302 Calculation of HVAC Total System Performance Ratio, Calculation of the HVAC TSPR for the Standard Reference Design
The simulation program shall calculate the HVAC TSPR based only on the input for the proposed design and the requirements of this appendix. The ...
C403.1.1 [CE] Commercial Energy Efficiency, HVAC Total System Performance Ratio (HVAC TSPR)
of the standard reference design as calculated according to Appendix D, Calculation of HVAC Total System Performance Ratio.
Exceptions:
Buildings ...
CD201 Calculation of HVAC Total System Performance Ratio, Compliance
ratio of the proposed design is more than or equal to the HVAC total system performance ratio of the standard reference design. The HVAC TSPR ...
CD601.1 Calculation of HVAC Total System Performance Ratio, Utility Rates
For the purpose of calculating the HVAC TSPR the following simple utility rate determined by the Washington state department of commerce shall ...
CD602.11 Calculation of HVAC Total System Performance Ratio, HVAC Equipment
The standard reference design HVAC equipment consists of separate space conditioning systems and dedicated outside air systems as described in Table ...