// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
The permit fee must be calculated as follows:
CF × RF × A
Related Code Sections
14A-4-4184.108.40.206 Permits, Calculation
The permit fee must be calculated as follows: CF × RF × A where: CF = The construction factor determined using Table 14A-12-1204.3(1 ...
2019 Chicago Construction Codes Administrative Provisions > 14A-4 Permits > 14A-4-412 Fees > 14A-4-412.2 All Other Permits > 14A-4-412.2.2 Permit Fee > 14A-4-4220.127.116.11 Calculation
14A-8-802.3 Posting Requirements, Calculation
, or spaces, the maximum occupancy will be calculated in accordance with the requirements in effect at the time of construction or alteration ...
2019 Chicago Construction Codes Administrative Provisions > 14A-8 Posting Requirements > 14A-8-802 Maximum Capacity Signs > 14A-8-802.3 Calculation
220.5 Wiring and Protection, Calculations
Unless other voltages are specified, for purposes of calculating branch-circuit and feeder loads, nominal system voltages of 120, 120/240, 208Y/120 ...
National Electrical Code 2017 of Chicago > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.5 Calculations
2207.3 Steel, Calculations
submission of the steel joist and joist girder calculations as prepared by a registered design professional responsible for the product design. Where ...
550.18 Special Occupancies, Calculations
The following method shall be employed in calculating the supply-cord and distribution-panelboard load for each feeder assembly for each mobile home ...
National Electrical Code 2017 of Chicago > 5 Special Occupancies > 550 Mobile Homes, Manufactured Homes, and Mobile Home Parks > 550.18 Calculations