// CODE SNIPPET
1926.405(e)(1) Cabinets, Fittings, and Boxes
Go To Full Code Chapter
Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations shall be installed so as to prevent moisture or water from entering and accumulating within the enclosures. In wet locations the enclosures shall be weatherproof.
Related Code Sections
1926.405(e)(1) Electrical, Cabinets, Fittings, and Boxes
Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations shall be installed so as to prevent moisture or water ...
1926.405(b)(3) Electrical, Pull and Junction Boxes for Systems Over 600 Volts, Nominal
In addition to other requirements in this section for pull and junction boxes, the following shall apply to these boxes for systems over 600 volts ...
1926.405(b)(2) Electrical, Covers and Canopies
All pull boxes, junction boxes, and fittings shall be provided with covers. If metal covers are used, they shall be grounded. In energized ...
1926.405(a)(1)(i) Electrical, Electrical Continuity of Metal Raceways and Enclosures
and shall be so connected to all boxes, fittings, and cabinets as to provide effective electrical continuity ...
1926.432(b) Electrical, Protection Against Corrosion
Metal raceways, cable armor, boxes, cable sheathing, cabinets, elbows, couplings, fittings, supports, and support hardware shall be of materials ...