// CODE SNIPPET
(B) Bypass Circuits
Related Code Sections
(B) Equipment for General Use, Bypass Circuits
as described in Article 430, Part III, shall be provided in the bypass circuit ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.124 Overload Protection > (B) Bypass Circuits
2.26.5 Electric Elevators, System to Monitor and Prevent Automatic Operation of the Elevator With Faulty Door Contact Circuits
and any of the following conditions exist: (1) the car door contact is closed or the portion of the circuit, incorporating this contact is bypassed ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 2 Electric Elevators > 2.26 Operating Devices and Control Equipment > 2.26.5 System to Monitor and Prevent Automatic Operation of the Elevator With Faulty Door Contact Circuits
830.15 Communications Systems, Power Limitations
1 V max , I max , and VA max are determined with the current-limiting impedance in the circuit (not bypassed) as follows: V max ...
National Electrical Code 2020 of Minnesota > 8 Communications Systems > 830 Network-Powered Broadband Communications Systems > 830.15 Power Limitations
220.127.116.11.3.12 Public Emergency Alarm Reporting Systems,
Where an auxiliary alarm system is in an alarm condition that has been acknowledged, deactivated, or bypassed, subsequent actuation of initiating ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 27 Public Emergency Alarm Reporting Systems > 27.6 Alarm Boxes > 27.6.3 Auxiliary Alarm Box > 18.104.22.168 Auxiliary Alarm Systems > 22.214.171.124.3 System Arrangement and Operation > 126.96.36.199.3.12
(2) Special Conditions, Other Class 1 Power Sources
short circuit, and with overcurrent protection bypassed, if used. Current-limiting impedance should not be bypassed when determining I max . Where ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 725 Class 1, Class 2, and Class 3 Remote- Control, Signaling, and Power-Limited Circuits > 725.41 Class 1 Circuit Classifications and Power Source Requirements > (A) Class 1 Power-Limited Circuits > (2) Other Class 1 Power Sources