// CODE SNIPPET
1004.8 Burner Controls
JUMP TO FULL CODE CHAPTER
Gas and oil modulating burners shall be provided with burner controls (oil and gas equivalent ratings) in accordance with Table 1004.8.
TABLE 1004.8 MINIMUM CONTROL REQUIREMENTS
TABLE 1004.8 MINIMUM CONTROL REQUIREMENTS
| TYPE OF CONTROL | GROSS OUTPUT FIRING RATE OF THE BOILER OR THE BURNER OIL DELIVERY RATE (gph), WHICHEVER IS GREATER | ||
| Combustion Controls | #6 Oil | #4 Oil | #2 Oil |
| On-Off | — | — | < 10 |
| Low-High-Off with low fire start | 20 to < 30 | 10 to < 30 | 10 to < 30 |
| Low-High-Low-Off with proven low fire start | 30 to < 50 | 30 to < 50 | 30 to < 50 |
| Full Modulation with proven low fire start | > 50 | > 50 | > 50 |
| Full Modulation with proven low fire start as well as cross-limited oxygen trim (dry cell electrochemical type) | > 350 | > 350 | > 350 |
Related Code Sections
1004.8 Boilers, Water Heaters and Pressure Vessels, Burner Controls
Gas and oil modulating burners shall be provided with burner controls (oil and gas equivalent ratings) in accordance with Table 1004.8 ...
NYC Mechanical Code 2008 > 10 Boilers, Water Heaters and Pressure Vessels > 1004 Boilers > 1004.8 Burner Controls
1004.8 Boilers, Water Heaters and Pressure Vessels, Burner Controls
Gas and oil modulating burners shall be provided with burner controls (oil and gas equivalent ratings) in accordance with Table 1004.8. TABLE ...
NYC Mechanical Code 2014 > 10 Boilers, Water Heaters and Pressure Vessels > 1004 Boilers > 1004.8 Burner Controls
1006.8.1 Boilers, Water Heaters and Pressure Vessels, Remote Control (Shutdown)
A remote control shall be provided to stop the flow of oil and/or gas and combustion air to any burner or fuel burning internal combustion equipment ...
NYC Mechanical Code 2008 > 10 Boilers, Water Heaters and Pressure Vessels > 1006 Safety and Pressure Relief Valves and Controls > 1006.8 Electrical Requirements > 1006.8.1 Remote Control (Shutdown)
1006.8.1 Boilers, Water Heaters and Pressure Vessels, Remote Control (Shut Down)
A remote control shall be provided to stop the flow of oil and/or gas and combustion air to any burner or fuel-burning internal combustion equipment ...
NYC Mechanical Code 2014 > 10 Boilers, Water Heaters and Pressure Vessels > 1006 Safety and Pressure Relief Valves and Controls > 1006.8 Electrical Requirements > 1006.8.1 Remote Control (Shut Down)
1305.10 Fuel-Oil Piping and Storage, Devices to Control Flow to Oil-Burning Equipment
the maximum working pressure in that part of the system. 2. A remote control shall be provided to stop the flow of oil to any burner ...
NYC Mechanical Code 2008 > 13 Fuel-Oil Piping and Storage > 1305 Fuel-Oil System Installation > 1305.10 Devices to Control Flow to Oil-Burning Equipment