// CODE SNIPPET
R606.13.1 Bundling
Go To Full Code Chapter
Bundling shall be permitted when two bars are required at the same location in a wall or in a bond beam.
Upcodes Diagrams
Related Code Sections
R606.13.1 Wall Construction, Bundling
Bundling shall be permitted when two bars are required at the same location in a wall or in a bond beam ...
25.6 Reinforcement Details, Bundled Reinforcement
Groups of parallel reinforcing bars bundled in contact to act as a unit shall be limited to four in any one bundle ...
R608.8.2.2 Wall Construction, Bundled Bars in Lintels
It is permitted to bundle two bars in contact with each other in lintels if all of the following are observed: Bars equal to or less than No. 6 ...
R608.8.2.2 Wall Construction, Bundled Bars in Lintels
It is permitted to bundle two bars in contact with each other in lintels if all of the following are observed: Bars equal to or less than No. 6 ...
606.7 Water Supply and Distribution, Labeling of Water Distribution Pipes in Bundles
Where water distribution piping is bundled at installation, each pipe in the bundle shall be indentified using stenciling or commercially available ...