// CODE SNIPPET
1302.1 Building System Risk Categories
JUMP TO FULL CODE CHAPTER
Activities, systems, or equipment shall be designed to meet Category 1 through Category 4 requirements as detailed in this code. [NFPA 99:4.1]
Categories shall be determined by following and documenting a defined risk assessment procedure. [NFPA 99:4.2.1]
A documented risk assessment shall not be required for Category 1. [NFPA 99:4.2.2]
Related Code Sections
1302.1 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Building System Risk Categories
Activities, systems, or equipment shall be designed to meet Category 1 through Category 4 requirements as detailed in this code. [NFPA 99:4.1 ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1302.0 Design Requirements > 1302.1 Building System Risk Categories
1604.5 Structural Design, Risk Category
Each building and structure shall be assigned a risk category in accordance with Table 1604.5. Where a referenced standard specifies an occupancy ...
Building Code 2012 of Nevada > 16 Structural Design > 1604 General Design Requirements > 1604.5 Risk Category
1604.5 Structural Design, Risk Category
Each building and structure shall be assigned a risk category in accordance with Table 1604.5. Where a referenced standard specifies an occupancy ...
Building Code 2018 of Nevada > 16 Structural Design > 1604 General Design Requirements > 1604.5 Risk Category
301.1.4 Compliance Methods, Evaluation and Design Procedures
to comply with this section.
The seismic evaluation and design of unreinforced masonry bearing wall buildings in Risk Category I or II are permitted ...
Existing Building Code 2012 of Nevada > 3 Compliance Methods > 301 Compliance Methods > 301.1 General > 301.1.4 Evaluation and Design Procedures
303.3.2 Provisions for All Compliance Methods, Compliance With Reduced Seismic Forces
2.1. The seismic evaluation and design of unreinforced masonry bearing wall buildings in Risk Category I or II are permitted to be based ...
Existing Building Code 2018 of Nevada > 3 Provisions for All Compliance Methods > 303 Structural Design Loads and Evaluation and Design Procedures > 303.3 Seismic Evaluation and Design Procedures > 303.3.2 Compliance With Reduced Seismic Forces