// CODE SNIPPET
(E) Building Control Circuits
Related Code Sections
(E) Special Conditions, Building Control Circuits
Article 725, where building control circuits (e.g., elevator capture, fan shutdown) are associated with the fire alarm system ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 760 Fire Alarm Systems > 760.3 Other Articles > (E) Building Control Circuits
3.3.60 Definitions, Control Unit
A system component that monitors inputs and controls outputs through various types of circuits. (SIG-PRO ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 3 Definitions > 3.3 General Definitions > 3.3.60 Control Unit
18.104.22.168.5 Public Emergency Alarm Reporting Systems,
Circuits shall not pass over, under, through, or be attached to buildings or property not owned by or under the control of the authority having ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 27 Public Emergency Alarm Reporting Systems > 27.7 Public Cable Plant > 27.7.2 Signal Transmission and Receiving Circuits > 22.214.171.124 General > 126.96.36.199.5
21.4.4* Emergency Control Function Interfaces,
Control circuits to shut down elevator power shall be monitored for the presence of operating voltage. Loss of voltage to the control circuit ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 21 Emergency Control Function Interfaces > 21.4 Elevator Shutdown > 21.4.4*
188.8.131.52 Emergency Communications Systems (ECS),
Where the separation of the in-building fire emergency voice/alarm control equipment occurs as in 184.108.40.206.4, and where the circuits are run ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 24 Emergency Communications Systems (ECS) > 24.4* In-Building Fire Emergency Voice/Alarm Communications Systems (EVACS) > 24.4.8* Relocation and Partial Evacuation > 220.127.116.11