// CODE SNIPPET
1910.261(k)(13) Broke Hole
JUMP TO FULL CODE CHAPTER
A guardrail that complies with subpart D of this part shall be provided at broke holes.
An alarm bell or a flashing light shall be actuated before dropping material through the broke hole.
Where pulpers are located directly below the broke hole on a paper machine and where the broke hole opening is large enough to permit a worker to fall through, any employee pushing broke down the hole shall wear a safety belt attached to a safety belt line. The safety belt line shall be fastened in such a manner that it is impossible for the person to fall into the pulper.
Related Code Sections
1910.261(k)(13) Special Industries, Broke Hole
A guardrail that complies with subpart D of this part shall be provided at broke holes ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(13) Broke Hole
1910.28(b)(3) Walking-Working Surfaces, Holes
is protected from falling through any hole (including skylights) that is 4 feet (1.2 m) or more above a lower level by one or more of the following ...
OSHA 1910 General Industry > D Walking-Working Surfaces > 1910.28 Duty to Have Fall Protection and Falling Object Protection > 1910.28(b) Protection From Fall Hazards > 1910.28(b)(3) Holes
1910.262(d)(2) Special Industries, Cleanout Holes
Cleanout holes within reaching distance of the fan or picker beater shall have their covers securely fastened and they shall not be opened while ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(d) Openers and Pickers > 1910.262(d)(2) Cleanout Holes
1910.109(e)(3) Hazardous Materials, Loading of Explosives in Blast Holes
All drill holes shall be sufficiently large to admit freely the insertion of the cartridges of explosives ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.109 Explosives and Blasting Agents > 1910.109(e) Use of Explosives and Blasting Agents > 1910.109(e)(3) Loading of Explosives in Blast Holes
1910.28(b)(3)(v) Walking-Working Surfaces,
Each employee is protected from falling through a hatchway and chutefloor hole ...
OSHA 1910 General Industry > D Walking-Working Surfaces > 1910.28 Duty to Have Fall Protection and Falling Object Protection > 1910.28(b) Protection From Fall Hazards > 1910.28(b)(3) Holes > 1910.28(b)(3)(v)