// CODE SNIPPET
503.2.6 Bridges and Elevated Surfaces
JUMP TO FULL CODE CHAPTER
Where a bridge or an elevated surface is part of a fire apparatus access road, the bridge shall be constructed and maintained in accordance with AASHTO HB-17. Bridges and elevated surfaces shall be designed for a live load sufficient to carry the imposed loads of fire apparatus. Vehicle load limits shall be posted at both entrances to bridges where required by the fire code official. Where elevated surfaces designed for emergency vehicle use are adjacent to surfaces that are not designed for such use, approved barriers, approved signs or both shall be installed and maintained where required by the fire code official.
Related Code Sections
503.2.6 Fire Service Features, Bridges and Elevated Surfaces
Where a bridge or an elevated surface is part of a fire apparatus access road, the bridge shall be constructed and maintained in accordance ...
2018 Philadelphia Fire Code > 5 Fire Service Features > 503 Fire Apparatus Access Roads > 503.2 Specifications > 503.2.6 Bridges and Elevated Surfaces
2308.5.7 Wood, Bridging
with studs having a height-to-least-thickness ratio exceeding 50 shall have bridging that is not less than 2 inches (51 mm) in thickness and of the same width ...
2018 Philadelphia Building Code > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.5 Wall Construction > 2308.5.7 Bridging
R502.7.1 Floors, Bridging
Joists exceeding a nominal 2 inches by 12 inches (51 mm by 305 mm) shall be supported laterally by solid blocking, diagonal bridging (wood or metal ...
2018 Philadelphia Residential Code > 5 Floors > R502 Wood Floor Framing > R502.7 Lateral Restraint at Supports > R502.7.1 Bridging
R802.8.1 Roof-Ceiling Construction, Bridging
blocking, diagonal bridging (wood or metal) or a continuous 1-inch by 3-inch (25 mm by 76 mm) wood strip nailed across the rafters or ceiling joists ...
2018 Philadelphia Residential Code > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.8 Lateral Support > R802.8.1 Bridging
2409.4.2 Glass and Glazing, Surface Area
The glass in glass elevator car doors shall be not less than 60 percent of the total visible door panel surface area as seen from the car side ...
2018 Philadelphia Building Code > 24 Glass and Glazing > 2409 Glass in Walkways, Elevator Hoistways and Elevator Cars > 2409.4 Glass in Elevator Cars > 2409.4.2 Surface Area