// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
The bridge shall be designed for a live load sufficient to carry the imposed loads of fire apparatus.
Related Code Sections
126.96.36.199.5 Fire Department Access and Water Supply, Bridges
When a bridge is required to be used as part of a fire department access road, it shall be constructed and maintained in accordance with nationally ...
Fire Code 2018 of West Virginia > 18 Fire Department Access and Water Supply > 18.2 Fire Department Access > 18.2.3 Fire Department Access Roads > 188.8.131.52 Specifications > 184.108.40.206.5 Bridges
2308.5.7 Wood, Bridging
with studs having a height-to-least-thickness ratio exceeding 50 shall have bridging that is not less than 2 inches (51 mm) in thickness and of the same width ...
Building Code 2015 of West Virginia > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.5 Wall Construction > 2308.5.7 Bridging
R502.7.1 Floors, Bridging
Joists exceeding a nominal 2 inches by 12 inches (51 mm by 305 mm) shall be supported laterally by solid blocking, diagonal bridging (wood or metal ...
Residential Code 2015 of West Virginia > 5 Floors > R502 Wood Floor Framing > R502.7 Lateral Restraint at Supports > R502.7.1 Bridging
R802.8.1 Roof-Ceiling Construction, Bridging
blocking, diagonal bridging (wood or metal) or a continuous 1-inch by 3-inch (25 mm by 76 mm) wood strip nailed across the rafters or ceiling joists ...
Residential Code 2015 of West Virginia > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.8 Lateral Support > R802.8.1 Bridging
(D) Special Equipment, Supports on Bridges
Bridge wire contact conductors shall be kept at least 65 mm (2 1 / 2 in.) apart, and, where the span exceeds 25 m (80 ft), insulating saddles shall ...
National Electrical Code 2017 of West Virginia > 6 Special Equipment > 610 Cranes and Hoists > 610.21 Installation of Contact Conductors > (D) Supports on Bridges