// CODE SNIPPET
1926.452(e) Bricklayers' Square Scaffolds (Squares)
JUMP TO FULL CODE CHAPTER
Scaffolds made of wood shall be reinforced with gussets on both sides of each corner.
Diagonal braces shall be installed on all sides of each square.
Diagonal braces shall be installed between squares on the rear and front sides of the scaffold, and shall extend from the bottom of each square to the top of the next square.
Scaffolds shall not exceed three tiers in height, and shall be so constructed and arranged that one square rests directly above the other. The upper tiers shall stand on a continuous row of planks laid across the next lower tier, and shall be nailed down or otherwise secured to prevent displacement.
Related Code Sections
1926.452(e) Scaffolds, Bricklayers' Square Scaffolds (Squares)
Diagonal braces shall be installed between squares on the rear and front sides of the scaffold ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(e) Bricklayers' Square Scaffolds (Squares)
1926.450 Scaffolds, Scope, Application and Definitions Applicable to This Subpart
in a fixed position with respect to another member, or to a building or structure.
Bricklayers' square scaffold means a supported scaffold ...
OSHA 1926 Construction > L Scaffolds > 1926.450 Scope, Application and Definitions Applicable to This Subpart
1926.452(c)(2) Scaffolds,
The cross braces shall be of such length as will automatically square and align vertical members so that the erected scaffold is always plumb, level ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(c) Fabricated Frame Scaffolds (Tubular Welded Frame Scaffolds) > 1926.452(c)(2)
1926.452(a)(9) Scaffolds,
Where wooden poles are spliced, the ends shall be squared and the upper section shall rest squarely on the lower section. Wood splice plates shall ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(a) Pole Scaffolds > 1926.452(a)(9)
1926.452(w)(1) Scaffolds,
and to secure vertical members together laterally so as to automatically square and align the vertical members. Scaffolds shall be plumb, level, and squared ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(w) Mobile Scaffolds > 1926.452(w)(1)