// CODE SNIPPET
E3702.11 Branch Circuits for Air-Conditioning and Heat Pump Equipment
Related Code Sections
E3702.11 Branch Circuit and Feeder Requirements, Branch Circuits for Air-Conditioning and Heat Pump Equipment
on the equipment. The branch-circuit overcurrent device rating shall be the size and type marked on the appliance. [440.4(B), 440.35] ...
E3703.1 Branch Circuit and Feeder Requirements, Branch Circuits for Central Heating
Central heating equipment other than fixed electric space heating shall be supplied by an individual branch circuit. Permanently connected air ...
422.12 Equipment for General Use, Central Heating Equipment
to be connected to the same branch circuit. Exception No. 2: Permanently connected air-conditioning equipment shall be permitted to be connected ...
E3705.5.4 Branch Circuit and Feeder Requirements, Air-Conditioning and Heat Pump Equipment
Air-conditioning and heat pump equipment circuit conductors shall be permitted to be protected against overcurrent in accordance with Section ...
(C) Wiring and Protection, Heating and Air-Conditioning Load
The largest of the following six selections (load in kVA) shall be included: 100 percent of the nameplate rating(s) of the air conditioning ...