// CODE SNIPPET
708.11 Branch Circuit and Feeder Distribution Equipment
JUMP TO FULL CODE CHAPTER
Related Code Sections
708.11 Special Conditions, Branch Circuit and Feeder Distribution Equipment
COPS branch circuit distribution equipment shall be located within the same DCOA as the branch circuits it supplies ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 708 Critical Operations Power Systems (COPS) > 708.11 Branch Circuit and Feeder Distribution Equipment
225.30 Wiring and Protection, Number of Supplies
A building or other structure that is served by a branch circuit or feeder on the load side of a service disconnecting means shall be supplied ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.30 Number of Supplies
647.4 Special Equipment, Wiring Methods
means that are identified for use at the system voltage shall be provided for both ungrounded conductors in all feeders and branch circuits. Branch ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 647 Sensitive Electronic Equipment > 647.4 Wiring Methods
694.66 Special Equipment, Operating Voltage Range
Wind electric systems connected to dedicated branch or feeder circuits shall be permitted to exceed normal voltage operating ranges on these circuits ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 694 Wind Electric Systems > 694.66 Operating Voltage Range
(2) Special Occupancies, Feeders
The ampacity of supply feeders and the current rating of overcurrent protective devices supplying two or more branch circuits supplying X-ray units ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 517 Health Care Facilities > 517.73 Rating of Supply Conductors and Overcurrent Protection > (A) Diagnostic Equipment > (2) Feeders