UpCodes logo
Go To Full Code Chapter
Branch circuits shall be rated in accordance with the maximum allowable ampere rating or setting of the overcurrent protection device. The rating for other than individual branch circuits shall be 15, 20, 30, 40 and 50 amperes. Where conductors of higher ampacity are used, the ampere rating or setting of the specified over-current device shall determine the circuit rating. (210.18)

Related Code Sections

E3702.2 Branch Circuit and Feeder Requirements, Branch-Circuit Ampere Rating
Branch circuits shall be rated in accordance with the maximum allowable ampere rating or setting of the overcurrent protection device. The rating ...
210.23 Wiring and Protection, Permissible Loads, Multiple-Outlet Branch Circuits
In no case shall the load exceed the branch-circuit ampere rating. A branch circuit supplying two or more outlets or receptacles shall supply only ...