// CODE SNIPPET
(A) Bracket Wiring
JUMP TO FULL CODE CHAPTER
Brackets for use on scenery shall be wired internally, and the fixture stem shall be carried through to the back of the scenery where a bushing shall be placed on the end of the stem. Externally wired brackets or other fixtures shall be permitted where wired with cords designed for hard usage that extend through scenery and without joint or splice in canopy of fixture back and terminate in an approved-type stage connector located, where practical, within 450 mm (18 in.) of the fixture.
Related Code Sections
(A) Special Occupancies, Bracket Wiring
Brackets for use on scenery shall be wired internally, and the fixture stem shall be carried through to the back of the scenery where a bushing shall ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.63 Bracket Fixture Wiring > (A) Bracket Wiring
(I) Special Occupancies, Boxes, Fittings, and Cabinets
or by using a substantial brace. Exception: Snap-in-type boxes. Boxes provided with special wall or ceiling brackets and wiring devices with integral ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 550 Mobile Homes, Manufactured Homes, and Mobile Home Parks > 550.15 Wiring Methods and Materials > (I) Boxes, Fittings, and Cabinets
(E) Wiring Methods and Materials, Integral Enclosure
A wiring device with integral enclosure identified for the use, having brackets that securely fasten the device to walls or ceilings of conventional ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.15 Boxes, Conduit Bodies, or Fittings — Where Required > (E) Integral Enclosure
16.5 Connections Between Members, Brackets and Corbels
Brackets and corbels with shear span-to-depth ratio a v / d ≤ 1.0 and with factored horizontal tensile force N uc ≤ V u shall ...
Building Code Requirements for Structural Concrete of Minnesota > 16 Connections Between Members > 16.5 Brackets and Corbels
126.96.36.199 Electric Elevators, Bracket Fastenings
Guide-rail brackets shall be secured to their supporting structure by one of the following means: (a) by bolts or rivets (b) by using clip ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 2 Electric Elevators > 2.23 Car and Counterweight Guide Rails, Guide-Rail Supports, and Fastenings > 2.23.9 Guide-Rail Brackets and Building Supports > 188.8.131.52 Bracket Fastenings