// CODE SNIPPET
R610.5.2 Bottom (Sole) Plate Connection
JUMP TO FULL CODE CHAPTER
Related Code Sections
R610.5.2 Wall Construction, Bottom (Sole) Plate Connection
SIP walls shall have full bearing on a sole plate having a width equal to the nominal width of the foam core. Where SIP walls are supported directly ...
Residential Code 2018 of Kansas > 6 Wall Construction > R610 Structural Insulated Panel Wall Construction > R610.5 Wall Construction > R610.5.2 Bottom (Sole) Plate Connection
R602.3.4 Wall Construction, Bottom (Sole) Plate
Studs shall have full bearing on a nominal 2-by (51 mm) or larger plate or sill having a width not less than to the width of the studs ...
Residential Code 2018 of Kansas > 6 Wall Construction > R602 Wood Wall Framing > R602.3 Design and Construction > R602.3.4 Bottom (Sole) Plate
2308.6.7.1 Wood, Bottom Plate Connection
Braced wall line bottom plates shall be connected to joists or full-depth blocking below in accordance with Table 2304.10.1, or to foundations ...
Building Code 2018 of Kansas > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.6 Wall Bracing > 2308.6.7 Connections of Braced Wall Panels > 2308.6.7.1 Bottom Plate Connection
2304.3.1 Wood, Bottom Plates
Studs shall have full bearing on a 2-inch-thick (actual 1 1 / 2 -inch, 38 mm) or larger plate or sill having a width not less than equal to the width ...
Building Code 2018 of Kansas > 23 Wood > 2304 General Construction Requirements > 2304.3 Wall Framing > 2304.3.1 Bottom Plates
(C) Wiring and Protection, Connected to Rod, Pipe, or Plate Electrodes
Where connected to rod, pipe, or plate electrodes as in 250.52(A)(5) or (A)(7), that portion of the grounding electrode conductor that is the sole ...
National Electrical Code 2017 of Kansas > 2 Wiring and Protection > 250 Grounding and Bonding > 250.166 Size of the Direct-Current Grounding Electrode Conductor > (C) Connected to Rod, Pipe, or Plate Electrodes