UpCodes logo
Go To Full Code Chapter
Studs shall have full bearing on a nominal 2-by (51 mm) or larger plate or sill having a width not less than to the width of the studs.

Related Code Sections

R602.3.4 Wall Construction, Bottom (Sole) Plate
Studs shall have full bearing on a nominal 2-by (51 mm) or larger plate or sill having a width not less than to the width of the studs ...
R610.5.2 Wall Construction, Bottom (Sole) Plate Connection
SIP walls shall have full bearing on a sole plate having a width equal to the nominal width of the foam core. Where SIP walls are supported directly ...
2304.3.1 Wood, Bottom Plates
Studs shall have full bearing on a 2-inch-thick (actual 11/2-inch, 38 mm) or larger plate or sill having a width not less than equal to the width ...
2304.3.1 Wood, Bottom Plates
Studs shall have full bearing on a 2-inch-thick (actual 11/2-inch, 38 mm) or larger plate or sill having a width not less than equal to the width ...
2304.3.1 Wood, Bottom Plates
Studs shall have full bearing on a 2-inch-thick (actual 11/2-inch, 38 mm) or larger plate or sill having a width at least equal to the width ...