Copy and paste the link below into emails, chats or browsers.
You can also copy or bookmark the link from your browser's address bar.
Studs shall have full bearing on a 2-inch-thick (actual 11/2-inch, 38 mm) or larger plate or sill having a width at least equal to the width of the studs.
Studs shall have full bearing on a 2-inch-thick (actual 1 1 / 2 -inch, 38 mm) or larger plate or sill having a width at least equal to the width of the studs ...
Studs shall have full bearing on a plate or sill. Plates or sills shall be not less than 2 inches (51 mm) nominal in thickness and have a width not less than the width of the wall studs ...
SIP walls shall have full bearing on a sole plate having a width equal to the nominal width of the foam core. Where SIP walls are supported directly ...