// CODE SNIPPET
705.7 Borosilicate Glass Joints
JUMP TO FULL CODE CHAPTER
Lead-caulked joints for hub and spigot soil pipe shall be firmly packed with oakum or hemp and filled with molten lead not less than 1 inch (25 mm) in depth and not to recede more than 1/8 inch (3.2 mm) below the rim of the hub. Paint, varnish or other coatings shall not be permitted on the jointing material until after the joint has been tested and approved. Lead shall be run in one pouring and shall be caulked tight. Acid-resistant rope and acidproof cement shall be permitted.
Related Code Sections
705.7 Sanitary Drainage, Borosilicate Glass Joints
Glass-to-glass connections shall be made with a bolted compression-type, 300 series stainless steel coupling with contoured acid-resistant ...
708.1.6 Sanitary Drainage, Cleanout Plugs
Cleanout plugs shall be of copper-alloy, plastic or other approved materials. Cleanout plugs for borosilicate glass piping systems shall ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 708 Cleanouts > 708.1 Cleanouts Required > 708.1.6 Cleanout Plugs
P3005.2.6 Sanitary Drainage, Cleanout Plugs
Cleanout plugs shall be copper alloy, plastic or other approved materials. Cleanout plugs for borosilicate glass piping systems shall ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3005 Drainage System > P3005.2 Cleanouts Required > P3005.2.6 Cleanout Plugs
1404.12.5 Exterior Walls, Joints
structural glass veneer abuts nonresilient material at sides or top, expansion joints not less than 1 / 4 inch (6.4 mm) wide shall be provided ...
Building Code 2018 of Kansas > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.12 Glass Veneer > 1404.12.5 Joints