// CODE SNIPPET
1910.180(a)(16) Boom Stop
JUMP TO FULL CODE CHAPTER
The boom stop is a device used to limit the angle of the boom at the highest position.
Related Code Sections
1910.180(a)(16) Materials Handling and Storage, Boom Stop
The boom stop is a device used to limit the angle of the boom at the highest position ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.180 Crawler Locomotive and Truck Cranes > 1910.180(a) Definitions Applicable to This Section > 1910.180(a)(16) Boom Stop
1910.265(b)(4) Special Industries, Boom
The term boom means logs or timbers fastened together end to end and used to contain floating logs. The term includes enclosed logs ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(b) Definitions Applicable to This Section > 1910.265(b)(4) Boom
1910.181(a)(13) Materials Handling and Storage, Boom Harness
Boom harness means the block and sheave arrangement on the boom point to which the topping lift cable is reeved for lowering and raising the boom ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.181 Derricks > 1910.181(a) Definitions Applicable to This Section > 1910.181(a)(13) Boom Harness
1910.181(a)(14) Materials Handling and Storage, Boom Point
The boom point is the outward end of the top section of the boom ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.181 Derricks > 1910.181(a) Definitions Applicable to This Section > 1910.181(a)(14) Boom Point
1910.181(i)(6) Materials Handling and Storage, Securing Boom
Dogs, pawls, or other positive holding mechanism on the hoist shall be engaged. When not in use, the derrick boom shall ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.181 Derricks > 1910.181(i) Handling the Load > 1910.181(i)(6) Securing Boom