// CODE SNIPPET
R608.1.3 Bonding With Natural or Cast Stone
JUMP TO FULL CODE CHAPTER
In ashlar masonry, bonder units, uniformly distributed, shall be provided to the extent of not less than 10 percent of the wall area. Such bonder units shall extend not less than 4 inches (102 mm) into the backing wall.
Rubble stone masonry 24 inches (610 mm) or less in thickness shall have bonder units with a maximum spacing of 3 feet (914 mm) vertically and 3 feet (914 mm) horizontally, and if the masonry is of greater thickness than 24 inches (610 mm), shall have one bonder unit for each 6 square feet (0.557 m2) of wall surface on both sides.
Related Code Sections
R606.13.3 Wall Construction, Bonding With Natural or Cast Stone
Bonding with natural and cast stone shall conform to Sections R606.13.3.1 and R606.13.3.2 ...
2020 Minnesota Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.13 Multiple-Wythe Masonry > R606.13.3 Bonding With Natural or Cast Stone
R608.1.3 Wall Construction, Bonding With Natural or Cast Stone
Bonding with natural and cast stone shall conform to Sections R608.1.3.1 and R608.1.3.2 ...
Minnesota Residential Code 2015 > 6 Wall Construction > R608 Multiple-Wythe Masonry > R608.1 General > R608.1.3 Bonding With Natural or Cast Stone
2103.5 Masonry, Architectural Cast Stone
Architectural cast stone shall conform to ASTM C1364 ...
Minnesota Building Code 2015 > 21 Masonry > 2103 Masonry Construction Materials > 2103.5 Architectural Cast Stone
1405.7 Exterior Walls, Stone Veneer
be placed between the backing and the stone veneer. With wood stud backing, a 2-inch by 2-inch (51 by 51 mm) 0.0625-inch (1.59 mm) zinc-coated ...
Minnesota Building Code 2015 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.7 Stone Veneer