// CODE SNIPPET
3503.1.5.1 Bonding of Electrically Conductive Components
JUMP TO FULL CODE CHAPTER
Exposed noncurrent-carrying metal components, including metal gas piping, that are part of a flammable gas supply system located in a hazardous location shall be bonded to a grounded conductor in accordance with the provisions of the Electrical Code.
Related Code Sections
Section 310 General Regulations, Electrical Bonding
Each above-ground portion of a gas piping system that is likely to become energized shall be electrically continuous and bonded to an effective ...
Section 310 General Regulations, Electrical Bonding
Each above-ground portion of a gas piping system that is likely to become energized shall be continuously bonded electrically to an effective ground ...
1704.11.6 Structural Tests and Special Inspections, Bond Strength
Bond tests to qualify a primer, paint or encapsulant shall be conducted ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.11 Sprayed Fire-Resistant Materials > 1704.11.6 Bond Strength
603.1.3 Types of Construction, Electrical
The use of electrical wiring methods with combustible insulation, tubing, raceways and related components shall be permitted when installed ...
NYC Building Code 2014 > 6 Types of Construction > 603 Combustible Material in Type I and II Construction > 603.1 Allowable Materials > 603.1.3 Electrical
603.1.3 Types of Construction, Electrical
The use of electrical wiring methods with combustible insulation, tubing, raceways and related components shall be permitted when installed ...
NYC Building Code 2008 > 6 Types of Construction > 603 Combustible Material in Type I and II Construction > 603.1 Allowable Materials > 603.1.3 Electrical