// CODE SNIPPET
1311.2.2 Bonding Jumper Size
JUMP TO FULL CODE CHAPTER
The bonding jumper shall not be smaller than 6 AWG copper wire or equivalent. [NFPA 54:7.13.2.2]
Related Code Sections
1211.2.2 Fuel Gas Piping, Bonding Jumper Size
The bonding jumper shall not be smaller than 6 AWG copper wire or equivalent. [NFPA 54:7.13.2.2] ...
2018 Uniform Plumbing Code of Nevada > 12 Fuel Gas Piping > 1211.0 Electrical Bonding and Grounding > 1211.2 Bonding of CSST Gas Piping > 1211.2.2 Bonding Jumper Size
1311.2.2 Fuel Gas Piping, Bonding Jumper Size
The bonding jumper shall not be smaller than 6 AWG copper wire or equivalent. [NFPA 54:7.13.2.2] ...
2018 Uniform Mechanical Code of Nevada > 13 Fuel Gas Piping > 1311.0 Electrical Bonding and Grounding > 1311.2 Bonding of CSST Gas Piping > 1311.2.2 Bonding Jumper Size
(G) Wiring and Protection, Equipment Bonding Jumper Size
The equipment bonding jumper shall be sized in accordance with (1) or (2) as follows: If the grounding electrode conductor connection is made ...
National Electrical Code 2017 of Nevada > 2 Wiring and Protection > 250 Grounding and Bonding > 250.36 High-Impedance Grounded Neutral Systems > (G) Equipment Bonding Jumper Size
(C) Equipment for General Use, Used as Service Equipment
Each switchboard, switchgear, or panelboard, if used as service equipment, shall be provided with a main bonding jumper sized in accordance ...
National Electrical Code 2017 of Nevada > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.3 Support and Arrangement of Busbars and Conductors > (C) Used as Service Equipment
(C) Wiring Methods and Materials, Transitions
Where metal cable tray systems are mechanically discontinuous, as permitted in 392.18(A), a bonding jumper sized in accordance with 250.102 shall ...
National Electrical Code 2017 of Nevada > 3 Wiring Methods and Materials > 392 Cable Trays > 392.60 Grounding and Bonding > (C) Transitions