// CODE SNIPPET
1411.2.1 Bond Strength and Tests
JUMP TO FULL CODE CHAPTER
Veneer shall develop a bond to the backing in accordance with TMS 402, Section 12.3.2.4.
Not less than two shear tests shall be performed for the adhered veneer between the units and the supporting element. At least one shear test shall be performed at each building for each 5,000 square feet (465 m2) of floor area or fraction thereof.
Related Code Sections
1411.2.1 Exterior Walls, Bond Strength and Tests
Veneer shall develop a bond to the backing in accordance with TMS 402, Section 12.3.2.4 . Not less than two shear tests shall be performed ...
Los Angeles Building Code > 14 Exterior Walls > 1411 [DSA-SS & DSA-SS/CC, OSHPD 1 & 4] Additional Requirements for Anchored and Adhered Veneer > 1411.2 Adhered Veneer > 1411.2.1 Bond Strength and Tests
1705.14.6 Special Inspections and Tests, Bond Strength
The test samples for determining the cohesive/adhesive bond strength ...
Los Angeles Building Code > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.6 Bond Strength
1705.14.6 Special Inspections and Tests, Bond Strength
The test samples for determining the cohesive/adhesive bond strength ...
Los Angeles Building Code > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.6 Bond Strength
1705A.14.6 Special Inspections and Tests, Bond Strength
The test samples for determining the cohesive/adhesive bond strength ...
Los Angeles Building Code > 17A Special Inspections and Tests > 1705A Required Special Inspections and Tests > 1705A.14 Sprayed Fire-Resistant Materials > 1705A.14.6 Bond Strength
704.13.3.2 Fire and Smoke Protection Features, Primers, Paints and Encapsulants
not exceed 16 inches (400 mm). The average and minimum bond strength values shall be determined based on a minimum of five bond tests conducted ...
Los Angeles Building Code > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.13 Sprayed Fire-Resistant Materials (SFRM) > 704.13.3 Substrate Condition > 704.13.3.2 Primers, Paints and Encapsulants