// CODE SNIPPET
2109.2.3.1 Bolts
JUMP TO FULL CODE CHAPTER
Bolt values shall not exceed those set forth in Table 2109.2.3.1.
ALLOWABLE SHEAR ON BOLTS IN ADOBE MASONRY
DIAMETER OF BOLTS (inches) | MINIMUM EMBEDMENT (inches) | SHEAR (pounds) |
1/2 | — | — |
5/8 | 12 | 200 |
3/4 | 15 | 300 |
7/8 | 18 | 400 |
1 | 21 | 500 |
11/8 | 24 | 600 |
For SI: 1 inch = 25.4 mm, 1 pound = 4.448 N.
Related Code Sections
2109.2.3.1 Masonry, Bolts
Bolt values shall not exceed those set forth in Table 2109.2.3.1. TABLE 2109.2.3.1 ALLOWABLE SHEAR ON BOLTS IN ADOBE MASONRY DIAMETER OF ...
Building Code 2018 of Wyoming > 21 Masonry > 2109 Empirical Design of Adobe Masonry > 2109.2 Adobe Construction > 2109.2.3 Allowable Stress > 2109.2.3.1 Bolts
2109.3.3.1 Masonry, Bolts
Bolt values shall not exceed those set forth in Table 2109.3.3.1.
TABLE 2109.3.3.1 ALLOWABLE SHEAR ON BOLTS IN ADOBE MASONRY
DIAMETER ...
Building Code 2015 of Wyoming > 21 Masonry > 2109 Empirical Design of Masonry > 2109.3 Adobe Construction > 2109.3.3 Allowable Stress > 2109.3.3.1 Bolts
2204.2 Steel, Bolting
The design, installation and inspection of bolts shall be in accordance with the requirements of Sections 2205, 2206, 2207, 2210 and 2211. For ...
2204.2 Steel, Bolting
The design, installation and inspection of bolts shall be in accordance with the requirements of Sections 2205, 2206, 2207, 2210 and 2211. For ...
1010.1.9.4 Means of Egress, Bolt Locks
Manually operated flush bolts or surface bolts are not permitted. Exceptions: On doors not required for egress in individual dwelling units ...
Fire Code 2015 of Wyoming > 10 Means of Egress > 1010 Doors, Gates and Turnstiles > 1010.1 Doors > 1010.1.9 Door Operations > 1010.1.9.4 Bolt Locks