// CODE SNIPPET
3103.10.3 Blowers
Go To Full Code Chapter
An air-supported structure used as a place of assembly shall be furnished with not less than two blowers, each of which has adequate capacity to maintain full inflation pressure with normal leakage. The design of the blower shall be so as to provide integral limiting pressure at the design pressure specified by the manufacturer.
Related Code Sections
3103.10.3 Tents, Temporary Special Event Structures and Other Membrane Structures, Blowers
An air-supported structure used as a place of assembly shall be furnished with not less than two blowers, each of which has adequate capacity ...
3103.10.3 Tents, Temporary Special Event Structures and Other Membrane Structures, Blowers
An air-supported structure used as a place of assembly shall be furnished with not less than two blowers, each of which has adequate capacity ...
3102.8.1.2 Special Construction, Blower Equipment
Blower equipment shall meet all of the following requirements: Blowers shall be powered by continuous-rated motors at the maximum power required ...
3102.8.1.2 Special Construction, Blower Equipment
Blower equipment shall meet all of the following requirements: Blowers shall be powered by continuous-rated motors at the maximum power required ...
3102.8.1.2 Special Construction, Blower Equipment
Blower equipment shall meet all of the following requirements:
Blowers shall be powered by continuous-rated motors at the maximum power required ...