// CODE SNIPPET
1910.261(g)(19) Blow Lines
JUMP TO FULL CODE CHAPTER
[Reserved]
When blow lines from more than one digester lead into one pipe, the cock or valve of the blow line from the tank being inspected or repaired shall be locked or tagged out, or the line shall be disconnected and blocked off.
[Reserved]
Related Code Sections
1910.261(g)(19) Special Industries, Blow Lines
[Reserved] When blow lines from more than one ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(g) Chemical Processes of Making Pulp > 1910.261(g)(19) Blow Lines
1910.261(g)(14) Special Industries, Blowing Digester
, and the hand plate shall not be removed until the digester cook signals the blow-pit man that the blow is completed. Whenever it becomes necessary ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(g) Chemical Processes of Making Pulp > 1910.261(g)(14) Blowing Digester
1910.106(b)(3)(iv)(b) Hazardous Materials, Size of Vents
Each tank shall be vented through piping adequate in size to prevent blow-back of vapor or liquid at the fill opening while the tank is being filled ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(b) Tank Storage > 1910.106(b)(3) Installation of Underground Tanks > 1910.106(b)(3)(iv) Vents > 1910.106(b)(3)(iv)(b) Size of Vents
1910.261 Special Industries, Pulp, Paper, and Paperboard Mills
blow lines from more than one digester lead into one pipe, the cock or valve of the blow line from the tank being inspected or repaired ...
1910.1043(g)(1) Toxic and Hazardous Substances,
Compressed air "blow down" cleaning shall be prohibited where alternative means are feasible. Where compressed air is used for cleaning ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1043 Cotton Dust > 1910.1043(g) Work Practices > 1910.1043(g)(1)