// CODE SNIPPET
2508.6.3 Blocking of Perimeter Edges
JUMP TO FULL CODE CHAPTER
Perimeter edges shall be blocked using a wood member not less than 2-inch by 6-inch (51 mm by 152 mm) nominal dimension. Blocking material shall be installed flat over the top plate of the wall to provide a nailing surface not less than 2 inches (51 mm) in width for the attachment of the gypsum board or gypsum panel product.
Related Code Sections
2508.6.3 Gypsum Board, Gypsum Panel Products and Plaster, Blocking of Perimeter Edges
Perimeter edges shall be blocked using a wood member not less than 2-inch by 6-inch (51 mm by 152 mm) nominal dimension. Blocking material shall ...
Building Code 2018 of Illinois > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2508 Gypsum Construction > 2508.6 Horizontal Gypsum Board or Gypsum Panel Product Diaphragm Ceilings > 2508.6.3 Blocking of Perimeter Edges
C407.5.2 [CE] Commercial Energy Efficiency, Thermal Blocks
, and in combination with the following guidelines: Separate thermal blocks shall be assumed for interior and perimeter spaces. Interior spaces shall be those ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [CE] Commercial Energy Efficiency > C407 Total Building Performance > C407.5 Calculation Procedure > C407.5.2 Thermal Blocks
16220.127.116.11 Structural Design, Perimeter Ties
Perimeter ties shall consist of continuous reinforcement in slabs; continuous or spliced decks or sheathing; continuous or spliced members framing ...
Building Code 2018 of Illinois > 16 Structural Design > 1616 Structural Integrity > 1616.3 Bearing Wall Structures > 1616.3.2 Other Bearing Wall Structures > 1618.104.22.168 Perimeter Ties
1025.2.4 Means of Egress, Perimeter Demarcation Lines
Perimeter demarcation lines shall be placed within 4 inches (102 mm) of the wall and shall extend to within 2 inches (51 mm) of the markings ...
Building Code 2018 of Illinois > 10 Means of Egress > 1025 Luminous Egress Path Markings > 1025.2 Markings Within Exit Components > 1025.2.4 Perimeter Demarcation Lines