// CODE SNIPPET
1926.914(g) Block Holing
JUMP TO FULL CODE CHAPTER
The breaking of boulders by firing a charge of explosives that has been loaded in a drill hole.
Related Code Sections
1926.914(g) Blasting and the Use of Explosives, Block Holing
The breaking of boulders by firing a charge of explosives that has been loaded in a drill hole ...
OSHA 1926 Construction > U Blasting and the Use of Explosives > 1926.914 Definitions Applicable to This Subpart > 1926.914(g) Block Holing
1926.501(b)(4) Fall Protection, Holes
Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower ...
OSHA 1926 Construction > M Fall Protection > 1926.501 Duty to Have Fall Protection > 1926.501(b) > 1926.501(b)(4) Holes
1926.305(c) Tools - Hand and Power, Blocking
When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed. Where there is a possibility of slippage ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.305 Jacks-Lever and Ratchet, Screw, and Hydraulic > 1926.305(c) Blocking
1926.1404(h)(2) Cranes & Derricks in Construction, Blocking Material
The size, amount, condition and method of stacking the blocking must be sufficient to sustain the loads and maintain stability ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(h) Addressing Specific Hazards > 1926.1404(h)(2) Blocking Material
1926.405(g)(2)(v) Electrical, Cords Passing Through Holes
Flexible cords and cables shall be protected by bushings or fittings where passing through holes in covers, outlet boxes, or similar enclosures ...
OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(g) Flexible Cords and Cables > 1926.405(g)(2) Identification, Splices, and Terminations > 1926.405(g)(2)(v) Cords Passing Through Holes