// CODE SNIPPET
Section P2721 Bidet Installations
JUMP TO FULL CODE CHAPTER
The discharge water temperature from a bidet fitting shall be limited to not greater than 110°F (43°C) by a water-temperature-limiting device conforming to ASSE 1070/ASME A112.1070/CSA B125.70 or CSA B125.3.
Related Code Sections
Section P2721 Plumbing Fixtures, Bidet Installations
The bidet shall be equipped with either an air-gap-type or vacuum-breaker-type fixture supply fitting ...
609.5 Water Supply and Distribution, Prohibited Water Closet and Clinical Sink Supply
or clinical sink. This section shall not prohibit an approved bidet installation ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 609 Health Care Plumbing > 609.5 Prohibited Water Closet and Clinical Sink Supply
Section 408 Fixtures, Faucets and Fixture Fittings, Bidets
Bidets shall conform to ASME A112.19.2/CSA B45.1 ...
P2705.1 Plumbing Fixtures, General
The installation of fixtures shall conform to the following: Floor-outlet or floor-mounted fixtures shall be secured to the drainage connection ...
405.3.1 Fixtures, Faucets and Fixture Fittings, Water Closets, Urinals, Lavatories and Bidets
A water closet, urinal, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition, vanity ...
Plumbing Code 2018 of Kansas > 4 Fixtures, Faucets and Fixture Fittings > 405 Installation of Fixtures > 405.3 Setting > 405.3.1 Water Closets, Urinals, Lavatories and Bidets