// CODE SNIPPET
1808.6.3 Bent Piles
Related Code Sections
1808.6.3 Soils and Foundations, Bent Piles
The load-bearing capacity of piles discovered to have a sharp or sweeping bend shall be determined using an approved method of analysis ...
NYC Building Code 2014 > 18 Soils and Foundations > 1808 Deep Foundations > 1808.6 Tolerances > 1808.6.3 Bent Piles
1808.2.8.7 Soils and Foundations, Bent Piers or Piles
The load-bearing capacity of piers or piles discovered to have a sharp or sweeping bend shall be determined by an approved method of analysis ...
NYC Building Code 2008 > 18 Soils and Foundations > 1808 Pier and Pile Foundations > 1808.2 Piers and Piles—General Requirements > 1808.2.8 Allowable Pier or Pile Loads > 1808.2.8.7 Bent Piers or Piles
§27-691 Foundations, Tolerance and Modification of Design Due to Field Conditions
per cent of the capacity. (c) Bent piles. Where piles have been bent during installation, and the amount of the bend exceeds the allowable tolerance ...
NYC 1968 Code (Vol I) > 11 Foundations > 7 Pile Foundations-General Requirements > §27-691 Tolerance and Modification of Design Due to Field Conditions
§27-721 Foundations, Piling
The installation of all piling shall be subject to controlled inspection. Such inspection shall be performed only by an architect or engineer ...
1704.8 Structural Tests and Special Inspections, Pile Foundations
A special inspector shall be present when pile foundations are being installed and during tests. The special inspector shall make and submit ...
NYC Building Code 2008 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.8 Pile Foundations