// CODE SNIPPET
1910.262(l)(2) Benches or Working Platforms
JUMP TO FULL CODE CHAPTER
Branches or working platforms approximately 10 inches in height and 8 inches in width should be installed along the entire running length of the machine for the worker to stand on while creeling the machine. Such benches or platforms shall be covered with an abrasive or nonslip material.
Related Code Sections
1910.262(l)(2) Special Industries, Benches or Working Platforms
Branches or working platforms approximately 10 inches in height and 8 inches in width should be installed along the entire running length ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(l) Heavy Draw Boxes, Finishers, and Speeders Used in Worsted Drawing > 1910.262(l)(2) Benches or Working Platforms
1910.219(c)(2) Machinery and Machine Guarding, Guarding Horizontal Shafting
All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(c) Shafting > 1910.219(c)(2) Guarding Horizontal Shafting
1910.67(a)(7) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Platform
Any personnel-carrying device (basket or bucket) which is a component of an aerial device ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.67 Vehicle-Mounted Elevating and Rotating Work Platforms > 1910.67(a) Definitions Applicable to This Section > 1910.67(a)(7) Platform
1910.215(b)(3) Machinery and Machine Guarding, Bench and Floor Stands
The angular exposure of the grinding wheel periphery and sides for safety guards used on machines known as bench and floor stands should not exceed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(b) Guarding of Abrasive Wheel Machinery > 1910.215(b)(3) Bench and Floor Stands
1910.268(n)(7) Special Industries, Outside Work Platforms
Unless adequate railings are provided, safety straps and body belts shall be used while working on elevated work platforms such as aerial splicing ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(n) Overhead Lines > 1910.268(n)(7) Outside Work Platforms