// CODE SNIPPET
1926.307(j) Bearings and Facilities for Oiling
JUMP TO FULL CODE CHAPTER
All drip cups and pans shall be securely fastened.
Related Code Sections
1926.307(j) Tools - Hand and Power, Bearings and Facilities for Oiling
All drip cups and pans shall be securely fastened ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(j) Bearings and Facilities for Oiling
1926.900(t)(3) Blasting and the Use of Explosives,
Where fuel oil is used all fuel oil storage facilities shall be separated from the mixing plant and located in such a manner that in case of tank ...
OSHA 1926 Construction > U Blasting and the Use of Explosives > 1926.900 General Provisions > 1926.900(t) > 1926.900(t)(3)
1926.64(a)(2) Occupational Health and Environmental Controls,
This section does not apply to: Retail facilities ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.64 Process Safety Management of Highly Hazardous Chemicals > 1926.64(a) Application > 1926.64(a)(2)
1926.154(e) Fire Protection and Prevention, Oil-Fired Heaters
or gravity oil feed shall not be considered a primary safety control ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.154 Temporary Heating Devices > 1926.154(e) Oil-Fired Heaters
1926.350(i) Welding and Cutting, Oil and Grease Hazards
Oxygen cylinders and fittings shall be kept away from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators, hose, and apparatus ...
OSHA 1926 Construction > J Welding and Cutting > 1926.350 Gas Welding and Cutting > 1926.350(i) Oil and Grease Hazards