// CODE SNIPPET
H110.2 Bearing Plates
Related Code Sections
H110.2 Signs, Bearing Plates
The bearing plates of roof signs shall distribute the load directly to or upon masonry walls, steel roof girders, columns or beams. The building ...
1810.3.3.1.9 Soils and Foundations, Helical Piles
) where P u is the least value of: Sum of the areas of the helical bearing plates times the ultimate bearing capacity of the soil or rock ...
2015 Michigan Building Code > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.3 Determination of Allowable Loads > 1810.3.3.1 Allowable Axial Load > 1810.3.3.1.9 Helical Piles
R606.6.3 Wall Construction, Beam Supports
parallel to the beam upon solid masonry not less than 4 inches (102 mm) in thickness, or upon a metal bearing plate of adequate design and dimensions ...
2015 Michigan Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.6 Support Conditions > R606.6.3 Beam Supports
503.3 Exhaust Systems, Equipment and Appliance Identification Plate
Equipment and appliances used to exhaust explosive or flammable vapors, fumes or dusts shall bear an identification plate stating the ventilation ...
2015 Michigan Mechanical Code > 5 Exhaust Systems > 503 Motors and Fans > 503.3 Equipment and Appliance Identification Plate
2308.5.3.1 Wood, Bottom Plate or Sill
Studs shall have full bearing on a plate or sill. Plates or sills shall be not less than 2 inches (51 mm) nominal in thickness and have a width ...
2015 Michigan Building Code > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.5 Wall Construction > 2308.5.3 Plates and Sills > 2308.5.3.1 Bottom Plate or Sill