// CODE SNIPPET
R606.6.1 Bearing on Support
JUMP TO FULL CODE CHAPTER
Each masonry wythe shall be supported by not less than two-thirds of the wythe thickness.
Related Code Sections
R606.6.1 Wall Construction, Bearing on Support
Each masonry wythe shall be supported by not less than two-thirds of the wythe thickness ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.6 Support Conditions > R606.6.1 Bearing on Support
R505.3.3.3 Floors, Blocking at Interior Bearing Supports
Blocking is not required for continuous back-to-back floor joists at bearing supports. Blocking shall be installed between every other joist ...
Residential Code 2018 of Kansas > 5 Floors > R505 Cold-Formed Steel Floor Framing > R505.3 Floor Construction > R505.3.3 Joist Bracing and Blocking > R505.3.3.3 Blocking at Interior Bearing Supports
2304.9.2.3 Wood, Combination Simple and Two-Span Continuous Pattern
and shall bear on supports ...
Building Code 2018 of Kansas > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns > 2304.9.2.3 Combination Simple and Two-Span Continuous Pattern
2308.4.5 Wood, Joists Supporting Bearing Partitions
Bearing partitions parallel to joists shall be supported on beams, girders, doubled joists, walls or other bearing partitions. Bearing partitions ...
Building Code 2018 of Kansas > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.4 Floor Framing > 2308.4.5 Joists Supporting Bearing Partitions
302.3.3 General Regulations, Stud Cutting and Notching
or notching of studs to a depth not greater than 40 percent of the width of the stud is permitted in nonload-bearing partitions supporting no loads ...
Fuel Gas Code 2018 of Kansas > 3 General Regulations > 302 (IFGC) Structural Safety > 302.3 Cutting, Notching and Boring in Wood Members > 302.3.3 Stud Cutting and Notching