// CODE SNIPPET
(H) Battery Conductors
Related Code Sections
(H) Wiring and Protection, Battery Conductors
Overcurrent protection shall be permitted to be installed as close as practicable to the storage battery terminals in an unclassified location ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.21 Location in Circuit > (H) Battery Conductors
(A) Equipment for General Use, Disconnecting Means
A disconnecting means shall be provided for all ungrounded conductors derived from a stationary battery system with a voltage over 60 volts dc. A ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 480 Storage Batteries > 480.7 DC Disconnect Methods > (A) Disconnecting Means
(1) Special Occupancies, Isolated Power Circuits
, or by means of electrically isolated batteries. Conductors of isolated power circuits shall not be installed in cables, raceways, or other enclosures ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 517 Health Care Facilities > 517.160 Isolated Power Systems > (A) Installations > (1) Isolated Power Circuits
(C) Special Occupancies, Bonding Voltage Converter Enclosures
The equipment grounding conductor for the battery and the metal enclosure shall be permitted to be the same conductor ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 552 Park Trailers > 552.20 Combination Electrical Systems > (C) Bonding Voltage Converter Enclosures
907.1.2 Fire Protection Systems, Fire Alarm Shop Drawings
and notification power supplies. Annunciators. Power connection. Battery calculations. Conductor type and sizes. Voltage drop calculations ...
Minnesota Fire Code 2015 > 9 Fire Protection Systems > 907 Fire Alarm and Detection Systems > 907.1 General > 907.1.2 Fire Alarm Shop Drawings