// CODE SNIPPET
2509.2 Base for Tile
JUMP TO FULL CODE CHAPTER
Materials used as a base for wall tile in tub and shower areas and wall and ceiling panels in shower areas shall be of materials listed in Table 2509.2 and installed in accordance with the manufacturer's recommendations. Water-resistant gypsum backing board shall be used as a base for tile in water closet compartment walls when installed in accordance with GA-216 or ASTM C840 and the manufacturer's recommendations. Regular gypsum wallboard is permitted under tile or wall panels in other wall and ceiling areas when installed in accordance with GA-216 or ASTM C840.
Related Code Sections
2509.2 Gypsum Board, Gypsum Panel Products and Plaster, Base for Tile
Materials used as a base for wall tile in tub and shower areas and wall and ceiling panels in shower areas shall be of materials listed in Table ...
Building Code 2018 of Utah > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2509 Showers and Water Closets > 2509.2 Base for Tile
2509.2 Gypsum Board, Gypsum Panel Products and Plaster, Base for Tile
Materials used as a base for wall tile in tub and shower areas and wall and ceiling panels in shower areas shall be of materials listed in Table ...
Building Code 2015 of Utah > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2509 Showers and Water Closets > 2509.2 Base for Tile
1507.3.8 Roof Assemblies and Rooftop Structures, Application
Tile shall be applied according to the manufacturer's installation instructions, based on the following:
Climatic conditions.
Roof slope ...
Building Code 2015 of Utah > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.3 Clay and Concrete Tile > 1507.3.8 Application
1507.3.8 Roof Assemblies and Rooftop Structures, Application
Tile shall be applied according to the manufacturer's installation instructions, based on the following: Climatic conditions. Roof slope ...
Building Code 2018 of Utah > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.3 Clay and Concrete Tile > 1507.3.8 Application
1609.5.3 Structural Design, Rigid Tile
the top edge of the batten with consideration given for the point of rotation of the tiles based on straight bond or broken bond and the tile profile ...
Building Code 2015 of Utah > 16 Structural Design > 1609 Wind Loads > 1609.5 Roof Systems > 1609.5.3 Rigid Tile