// CODE SNIPPET
1910.262(l)(1) Band Pulley Covers
Go To Full Code Chapter
Covers for band pulleys shall be closed when the machine is in motion.
Related Code Sections
1910.262(l)(1) Special Industries, Band Pulley Covers
Covers for band pulleys shall be closed when the machine is in motion ...
1910.219(d) Machinery and Machine Guarding, Pulleys
and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes ...
1910.68(e)(2) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Items Covered
This periodic inspection shall cover but is not limited to the following items:
Steps.
Step Fastenings.
Rails.
Rail Supports and Fastenings ...
1910.219(e)(5) Machinery and Machine Guarding, Cone-Pulley Belts
The cone belt and pulley shall be equipped with a belt shifter so constructed as to adequately guard the nip point of the belt and pulley. If ...
1910.265(c)(24)(vi) Special Industries, Drums, Sheaves, and Pulleys
Drums, sheaves, and pulleys shall be smooth and free from surface defects liable to injure rope. Drums, sheaves, or pulleys having eccentric bores ...