// CODE SNIPPET
(F) Back-Fed Circuit Breakers
Related Code Sections
(F) Special Conditions, Back-Fed Circuit Breakers
Plug-in-type back-fed circuit breakers connected to an interconnected supply shall be secured in accordance with 408.36(D). Circuit breakers marked ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 710 Stand-Alone Systems > 710.15 General > (F) Back-Fed Circuit Breakers
(E) Special Conditions, Fastening
Listed plug-in-type circuit breakers back-fed from electric power sources that are listed and identified as interactive shall be permitted to omit ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.12 Load-Side Source Connections > (E) Fastening
(D) Equipment for General Use, Back-Fed Devices
Plug-in-type overcurrent protection devices or plug-in type main lug assemblies that are backfed and used to terminate field-installed ungrounded ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.36 Overcurrent Protection > (D) Back-Fed Devices
(A) Wiring and Protection, Circuit Breakers
The use of reconditioned circuit breakers shall comply with (1) through (3): Molded-case circuit breakers shall not be permitted ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.88 Reconditioned Equipment > (A) Circuit Breakers
(2) Equipment for General Use, Circuit Breaker
A branch-circuit inverse time circuit breaker rated in amperes shall be permitted as a controller for all motors. Where this circuit breaker is also ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.83 Ratings > (A) General > (2) Circuit Breaker