// CODE SNIPPET
3102.8.1.1 Auxiliary Inflation System
JUMP TO FULL CODE CHAPTER
In addition to the primary inflation system, in buildings larger than 1,500 square feet (140 m2) in area, an auxiliary inflation system shall be provided with sufficient capacity to maintain the inflation of the structure in case of primary system failure. The auxiliary inflation system shall operate automatically when there is a loss of internal pressure and when the primary blower system becomes inoperative.
Related Code Sections
3102.8.1.1 Special Construction, Auxiliary Inflation System
In addition to the primary inflation system, in buildings larger than 1,500 square feet (140 m 2 ) in area, an auxiliary inflation system shall ...
Building Code 2018 of Illinois > 31 Special Construction > 3102 Membrane Structures > 3102.8 Inflation Systems > 3102.8.1 Equipment Requirements > 3102.8.1.1 Auxiliary Inflation System
2702.2.14 Electrical, Membrane Structures
Standby power shall be provided for auxiliary inflation systems in permanent membrane structures as required in Section 3102.8.2. Standby power shall ...
Building Code 2018 of Illinois > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.2 Where Required > 2702.2.14 Membrane Structures
Section 2702 Electrical, Emergency and Standby Power Systems
Standby power shall be provided for auxiliary inflation systems in permanent membrane structures as required in Section 3102.8.2 ...
Article 366 Wiring Methods and Materials, Auxiliary Gutters
to be laid or set in place after the enclosures have been installed as a complete system. Nonmetallic Auxiliary Gutter. A flame-retardant ...
(5) Special Conditions, Auxiliary Power Supply
Generator sets that require more than 10 seconds to develop power shall be permitted if an auxiliary power supply energizes the emergency system ...
National Electrical Code 2017 of Illinois > 7 Special Conditions > 700 Emergency Systems > 700.12 General Requirements > (B) Generator Set > (5) Auxiliary Power Supply